(sorry, as far as I know only Dutch, but with screenshots.). I leave mine on 24/7 because it’s always backing up or ZFS is scrubbing the disks. In RAID mode it does not support hotplug, but it should allow hotplug in AHCI mode. Already found and old ATX PSU and my dremel to make the bracket :). Appreciate if you have the numbers for the original config, but I’d take your Xeon numbers as well if that’s what’s available. Don’t get the V3, it’s based on the newer 1150 socket and isn’t compatible with the 1155 socket in the Microserver. HP … Is there any fix available for this? I used this Cooler Master paste, $5 at Amazon: http://amzn.to/14bN93p I think just about any CPU thermal paste would work. I thought I would post some of my findings which may be helpful to others: For those wanting to use Server 2012 R2 I found following installation of the OS you MUST immediately install HP C020926 which is an older driver for the RAID controller as the one installed by 2012 R2 causes the machine to blue screen and crash. Does anyone know how to team the NICs yet? Hey Russ, thanks for the info, I was planning to buy this processor and stick it in so glad to see someone is having long term success. In my tests I have found VMDKs to run just as fast as VT-d pass-through so unless you really need to give NAS4Free direct access to the disks for SMART monitoring and spindown and such give VMDKs a try. One thing I’ve always wanted to do is team the gigabit NICs on my desktop and the server and see if I can get around 150MBps transfer rates between them. Thanks for the reply re: cpus. Please visit Contact HPand call our technical support team so that we can assess your entitlement. Do a Google search for Napp-It’s all in one ZFS / VMware solution. Think it has to connect to another serial interface. I want to put 4 SSD the server, 1 for the os on the ODD en the 3 others for vms and datastore and 1 HDD for a daily back-up of the server. I ran using standard celeron with hyper-v and a DC and an Exchange 2013 up all the time. I think it should…. As soon As I receive them I will build the system and report my findings here. Can i use ZFS with built in controller card and how do I set this up? Also, I cannot boot off of the MicroSD card; is that normal? I will try to remember to report back here with the result. of the Pentium and Celeron and i3 parts do seem to have ECC support. WEEE, Ethernet, VMWare ESXi 5.1U1 (HP bundle) installed on internal SD Card, Thanks for the info Patrik! I figure worse case I could disable two of the four cores to bring it down to 35W. http://www.ebay.co.uk/itm/New-OEM-Dell-MX714-Floppy-FDD-to-Sata-Power-Converter-Cable-/400298253923?pt=LH_DefaultDomain_0&hash=item5d33a29e63, Just tried 2×16 GB Ram modules and got stuck at 90% with Status Code 0114. Some time each day I have 1-2 other virtual machines running for backup and other tasks. It all depends on usage. About prices, you can get P410 with or without bbwc pretty cheap on ebay and such. Notify me of followup comments via e-mail. So, is the choice for 4TB disks: I myself have just spend 2, almost 3 weeks trying to get a Service Contract on a piece of HP hardware, but nobody can sell one to me, as I’m not a business… this does not bode well! I just made a post at my site with the Photos I’ve taken of my server. By any chance do you know what kind of RAM would be the best in this case? 4. For the life of me i cannot find a female floppy to female molex power adaptor anywhere. Well, seems that USB CD-ROM/DVD drives are not supported as hot plug: But you can still get it to work though :O), http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1027415. I’m looking forward to what the market will bring in the Microserver realm. Hi Morten, maybe next year =). I would update the Intelligent Provisiong seperately as described here: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03458406-2%257CdocLocale%253Den_US&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=5177957&ac.admitted=1387457527405.876444892.199480143. If anyone knows either a work around or what I need to do, to get this working, I’d like to hear it. Is it correct, that HP is using a “special” power connector? I have 3x 2½ SAS discs on top + Battery for my P410 controller. COVID-19: HELPING YOU ADAPT. any suggestions? I do have an iLO advanced license I bought on Amazon for about $40, but I am hesitant to install it as I don’t know if the same thing will happen there. – So far I have not heard of anyone who has tried 32GB memory. I’ve tried EVERY tweak/fix I can find running ESXi in Passthru for a RAID card that I can find, using v5.0, v5.1, v5.5, all seem to fail in different ways. In any case I’m pondering a downgrade just to check. Think I’m gonna move the server out of my living room. Maybe I’ll get another one when the Gen9s come out. I got one, and it works, and I was able to flash it into IT mode, but I could not get a VM in ESXi 5.5 to turn on with it mapped via PCI Passthrough (VT-D). I can confirm the thing about UDIMM ECC as required. Probably the main difference between the N40L and Gen8 HP Microserver is the CPU speed. HP ProLiant DL380p Gen8 (dual Xeon E5-2697v2 24C/48T, 192GB RAM) Ich biete hiermit meinen Highendserver an, da ich einen neuen Intel Xeon Gold gekauft habe. Ahh ok, Good to know Thanks Ben. With this I think you can run full core’s and threads of a E-1265 V2 in rellatively warm enviroments (30º C), Hi, Marcos. I just wrongly mentioned it was a chipset limitation. 1. HP ProLiant MicroServer Gen8 - Xeon E3-1220LV2 2.3 GHz - 8 GB - 0 GB | 775590-S01. I have found your blog, as well as the subsequent discussion/answers, extremely useful. intel Xeon E3-1225V2 3.2GHz 8M Socket LGA1155 Quad Core CPU Processor SR0PJ. The LSI9211 just worked in pass-through mode. And here’s HP’s official answer about high fan speed: “Comment added: 12/4/2013 10:15:14 PM Wattermeter shows G2020T and E3-1240 has same watt. I’m currently talking to their supplier in Holland/netherland reagarding 16gb ram blocks. Ben, been really good reading your article, sime great ideas, hower some time has elapsed since it first started and I see the gen 8 1610T is back on for a good price but as most if the Xeons v2 listed are now end of life what would a modern alternative that works well be please? How many physical disks can I plug in to a P222? Guess I have to go with the P222 if no other card is compatible with the iLO sensors. I know it’s a bit late but for future reference, to get SSH, you need to go to the Configuration Tab then Security Profile, Properties, and Start the SSH Server Service. In my post above i meant replace male floppy connector with FEMALE molex not male. Is this side bracket sold anywhere? On the nas4free front, it installed very easily but I’m not finding the performance great with the two VMDKs in a ZFS mirror. I’ll post more details on my setup in the future, but on the HP Microserver N40L which is half the speed of the G1610T I’ve run a Napp-It All-in-one ZFS server for my RAID/NAS, shared the storage back to VMWare via NFS, and ran half a dozen Ubuntu VMs on top of it without issues. HP / HPE Proliant DL380p Gen8 14,4 TB 10K SAS HDDs, 64GB RAM, Zum Verkauf kommt hier ein gebrauchter, voll funktionsfähiger Server von HP / HPE, Modell... Versand möglich. Can I ask what your iLO reports for the sensor “02-CPU” and if you see the fan speed increase under heavy load? Not quite sure I want to have 12TB array in VMDK’s on a RAID5 just yet :S. I’ve had a P410 in the system, but couldnt get passthrough to work on that either, and also had a disk failure, and because of ILO4 not understanding HP P410′s (no idea why not!) Not before I put in the P410, and not after either. 290 € 14199 Wilmersdorf. I’m running Win7, and it doesn’t show up in the add new USB unit section in VMware. Luckily I had it setup to raid 6. so it was ok to Loose 2 discs. Really? Otherwise I can’t think of a reason to get a Microserver over the ML310e (or something else the same size), especially with 32GB support. I wonder – will latest Citrix XenServer install on CPU upgraded system? The only option to use Raid is using a dedicated raid controller. Hey! 3x 120gb SSD for the data store and vms, do i go for Samsung, crucial or kingston’? Oh the fun of server installs. example: http://ark.intel.com/products/65719 I have a third 2012 as DC for other domain as well :¨). Now I will be down to half. I have 2 machines which I’m trying to consolidate into 1 as I only need it for Studying. Hey Frank. I do understand people wanting to do raid 5. Do you need more speed than the J1900 can provide? You have to use the Intelligent Provisioning. Thanks :). 10 minutes isnt enough time to stress test it… you need in excess of 2 hours running in your warm room to SEE if you will have issues…. I currently have 5 harddrives in my N36L and would love to be able to transfer the whole raid set to the Gen8. Sorry. Of course, this depends on the needed output + subtitle, but definitely isn’t up for the job in most cases. If you’re running a Xeon AND the B120 drivers, I’m concerned the fan might actually be too slow. If you buy a P410 at some point I’d strongly recommend buying the ram+battery as it will perform rather badly untill you do. You can also subscribe without commenting. In any case, I’d start out with build-in RAID and see if it doesn’t fit the bill. Is the fan speed controlled by BIOS/iLO? (11-09-2013 bt there seems to be an A version also but does not seem to fix the issue). Or can I get this software form somewhere else? 2. You wont notice any speed issue from the 6/3 connectors. 3. If you like, I can upload my config file so you can compare. IEC 60950-1, I have ESXi 5.0 with Win 7 virtual machines running on it. The MicroServer will be used for virtual lab environment using Hyper-V 2012 R2. I’ve experienced it before. I’m running the Gen 8 with a Xeon E3-1220 V2 and it runs fine. Daniel, i just checked out your link (after my last post). Patrick, the Stock heatsink may hold up with the new processor BUT that doesnt mean the power circuit on the motherboard for the CPU will with a new CPU thats double the old TDP values… you want to stick as CLOSE as possible to the stock TDP value to avoid problems…. Is it important? IEEE 802.3ab, http://www.intel.com/content/www/us/en/architecture-and-technology/turbo-boost/turbo-boost-technology.html, I’ve found that there is no problem with having turbo mode & HT enabled, at least for me with my e3-1265Lv2. I have added a Sapphire Radeon HD6450 2GB DDR3 64bit Passive LP and it works whitout any problem. :), Yea, I guess so. Else I have to buy a PCI card with USB 3.0 and do passthough, to make USB 3.0 available to my OS. Anyway, just need the firmware. Maybe your CPU is dead. I’ve excluded the Core i5 series because they don’t support ECC. tC = Operating Case temperature. Another positive spec that stood out is the dramatic jump between the default clock speed of 2.5 ghz and the turbo clock speed of 3.5 ghz… when most other Xeon options only jump about .5 ghz. Unfortunately the Celeron can’t handle 1080p, a friend of mine has it. Here’s a list of processors I think would be good candidates. Hallo und Herzlich Willkommen hier bei uns. It never ever fluctuates. In any case, I’ve left turbo on but disabled two cores. I’m using HTTPS just fine. Otherwise I will maybe contact HP support to have it confirmed. And press release. Supermicro boards have IPMI built in (but not in this form factor yet) which gives you remote media and KVM over IP for free. Er sollte beim Hp Proliant Microserver Gen8 Xeon Vergleich für sich entscheiden. Hi again, At low voltage (1.35 V), HP SmartMemory operates at DDR3-1333 MHz with one and two DIMMs per channel and at DDR3-1066 MHz at three DIMMs per channel. You will have no worry about heat and I think for most applications 16 or even 32 gb memory will be the main bottleneck before you come close to maxing out the cpu. When adding flash and battery you get much better performance on the P410, but it also comes at a Price Premium compared. Then my ilo would not run the system fan at 30% but more likely 6%. 4. It also needs a power source to operate properly but with much smaller amount of energy thus enabling capacitors instead of batteries to be used. I’m experiencing it too in both B120i and AHCI, no difference. Gestern, 21:05. That said, I did run Raid5 successfully on my NAS for 5 years. Hi, James. I’ll try another USB key. Seems like alot of people is enjoying your website. Here are a couple of observations – all with an AC power meter connected. XBMC running movies from Virtual NAS I’m using ESXi 5.5 U1. Only issue I’m having, if you can call it that, is HPs limited certificate choices where I can’t use an existing certificate I have. I’m using an E3-1230 V2. There are a total of three ethernet ports. Storage. (note: seems my fan is Down to 32% right this moment, so now i’m perplexed.) New cell phone service challenging Virgin Mobile, Supermicro X10SDV-F Build; Datacenter in a Box, NAS Server Build – ASRock C2750D4I & Silverstone DS380, HP Microserver Gen8 Specs Released | b3n.org, http://ark.intel.com/products/52804/Intel-BD82C204-PCH, http://www.supermicro.com/products/motherboard/xeon/c202_c204/x9scm-f.cfm, http://www.amazon.com/Dynatron-K2-Server-Workstation-Active/dp/B004HSSKBW/, http://www.amazon.com/gp/product/B005OYEU7G/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B005OYEU7G&linkCode=as2&tag=b0df7-20, https://h20392.www2.hp.com/portal/swdepot/try.do?productNumber=ILO_EVAL, http://www.superbiiz.com/detail.php?name=W8GE1600KI, [Sammelthread] HP ProLiant G8 G1610T/G2020T MicroServer - Seite 11, http://blog.davidwarburton.net/2010/10/25/rdm-mapping-of-local-sata-storage-for-esxi/, http://en.wikipedia.org/wiki/NAS4Free#History, http://www.ramcity.com.au/buy/ramcity-32gb-pc3-10600-ecc-unbuffered-240-pin-dimm-kit-2x-16gb/2xCVZ-MAC, https://b3n.org/m1015-hba-in-the-hp-gen8-microserver/, http://www.intel.com/content/dam/www/public/us/en/documents/design-guides/xeon-e3-1200v2-lga1155-thermal-guide.pdf, http://www.ebay.es/itm/Smart-Fan-Speed-Controller-I-With-Temperature-Sensor-/160494489350, http://ark.intel.com/compare/65726,65727,65728, http://www.crucial.com/store/partspecs.aspx?imodule=CT2K16G3ERSLD41339, http://www.allhdd.com/index.php?target=products&mode=search&subcats=Y&type=extended&avail=Y&pshort=Y&pfull=Y&pname=Y&pkeywords=Y&cid=0&q=CT2KIT204872BQ1339&src=ggl&gclid=CLK_zuKfg7kCFUQ6QgodAmcAjQ, http://homeservershow.com/forums/index.php?/topic/5895-potential-cpu-upgrade-options-for-microserver-g8/?p=65644, *Unofficial* Hardware Compatibility List (HCL) - Page 7 - Sophos User Bulletin Board, http://homeservershow.com/forums/index.php?/topic/6170-active-cpu-cooling-for-the-gen8/, http://images.plurk.com/ojcr-3VTZVVEquGlP1fFnUekKRq.jpg, http://2cpu.co.kr/bbs/board.php?bo_table=unbox&wr_id=1349, Compatible Processors for the HP MicroServer Gen8 : MS Windows Home Server, http://www.intel.com/content/www/us/en/architecture-and-technology/turbo-boost/turbo-boost-technology.html, http://serverfault.com/questions/510011/hp-proliant-ml310e-gen8-early-system-initialization-hangs-on-90, https://en.wikipedia.org/wiki/Ivy_Bridge_%28microarchitecture%29#Desktop_processors, http://www.newegg.com/Product/Product.aspx?Item=N82E16817994064, http://www.ebay.co.uk/itm/New-OEM-Dell-MX714-Floppy-FDD-to-Sata-Power-Converter-Cable-/400298253923?pt=LH_DefaultDomain_0&hash=item5d33a29e63, Neues NAS/HomeServer mit ESXi, ZFS, Plex, OwnCloud, MS Spielwiese, Linux Spielwiese, http://h30499.www3.hp.com/t5/ProLiant-Servers-Netservers/MicroServer-Gen8-is-noisy/td-p/6171563#.Upte_uIkr80, http://www.noctua.at/main.php?show=productview&products_id=50&lng=en, New hardware thoughts for home labs (Winter 2013) | rsts11 – Robert Novak on system administration, http://h18004.www1.hp.com/products/servers/software/vmware/esxi-image.html, http://h10032.www1.hp.com/ctg/Manual/c01608507.pdf, http://community.spiceworks.com/topic/261249-raid-10-not-available, http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/, http://www.ebay.com/itm/New-OEM-Dell-MX714-Floppy-FDD-to-Sata-Power-Converter-Cable-/400298253923?pt=LH_DefaultDomain_0&hash=item5d33a29e63, http://h18000.www1.hp.com/products/quickspecs/14565_na/14565_na.pdf, http://h30499.www3.hp.com/t5/HP-BladeSystem-Server-Blades/Flash-Based-Write-Cache-FBWC-amp-Battery-Backed-Write-Cache-BBWC/td-p/1517#.UrHzeeIgnjM, http://h30499.www3.hp.com/t5/HP-BladeSystem-Server-Blades/Flash-Based-Write-Cache-FBWC-amp-Battery-Backed-Write-Cache-BBWC/td-p/1517, http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=, http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03458406-2%257CdocLocale%253Den_US&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=5177957&ac.admitted=1387457527405.876444892.199480143, http://www.edbpriser.dk/i-o-hub-og-kort/hp-smart-array-p222-512-with-fbwc-id-6721241.aspx, http://h30094.www3.hp.com/product.aspx?sku=10389147&pagemode=ca, http://www.youtube.com/watch?v=OMTnIGM_E5k, [Sammelthread] HP ProLiant N36L/N40L/N54L Microserver - Seite 454, http://www.amazon.com/review/R2NNXYLGZ2L9J0/ref=cm_cr_pr_perm?ie=UTF8&ASIN=B005KKJPCO&linkCode=&nodeID=&tag=, https://www.pugetsystems.com/labs/articles/Multi-headed-VMWare-Gaming-Setup-564/, http://www.accc.gov.au/consumerguarantees, http://forums.freenas.org/threads/vt-d-pci-passthrough-with-esxi-5-5-and-lsi-9240-in-it-mode.17085/, http://h30507.www3.hp.com/t5/Technical-Support-Services-Blog/Customers-for-life/ba-p/154423#%2EUvdtmfX8Itd, http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=271475895778&ssPageName=ADME:X:AAQ:US:1123, Comparing VMware Home Lab Solutions: HP ProLiant Microserver Gen8 vs HP ProLiant DL320e Gen8 v2 | trainingrevolution, Ein neuer ESXi-Server | /var/pub/chris_blog, VMWare ESXi 5.5 on HP ProLiant Gen8 | Sven Seiler, http://homeservershow.com/forums/index.php?/topic/6596-hp-microserver-gen8-processor-faq/, http://sammit.net/hp-proliant-microserver-gen8-supports-4tb-drives/, https://my.vmware.com/web/vmware/details?downloadGroup=HP-ESXI-5.5.0U2-GA&productId=353, http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5390291&swItemId=MTX_8f34f27973a04a71b211d728ab&swEnvOid=4168, http://homeservershow.com/forums/index.php?/topic/9195-new-service-pack-2015040-9-apr-2015/, https://b3n.org/supermicro-2u-zfs-server-build/, https://b3n.org/supermicro-x10sdv-f-build-datacenter-in-a-box/, http://www.supermicro.com/products/motherboard/Xeon3000/#1667, http://homeservershow.com/forums/index.php?%2Ftopic%2F5639-proliant-microserver-gen8-links%2F, https://www.itconnected.tech/blog/intel-c200-series-chipset-quirks/, https://hardforum.com/threads/ecc-check-on-intel-i3-processors.1693051/, 7 Homelab Ideas | Why You Should Have A Homelab, Automatic Ripping Machine | Headless | Blu-Ray/DVD/CD, OpenDNS, CleanBrowsing, and 1.1.1.1 for Families | DNS Content Filtering, Installed Xeon E3-1230V2 in Gen8 HP Microserver. Great information about the new Gen8 microserver! Changed the config and now the server is inaudible. One trick with any CPU cooler is finding a way to power it since there isn’t an extra power connector for a FAN… you would want to figure out how to regulate the fan speed based on temperature somehow… Thanks. When running ESXi, plus a virtual server for Plex, plus any other virtual machines one should have, I guess we can’t expect the Celeron to be able to catch up :O) Man, I should had gone with the Pentium. Else, it’s at between 42-48%. Maybe someone else can use yours and others replies to my questions. I’m using the same DIMM sticks with a Xeon 1220 V2 and they are recognized as genuine HP DIMM. I don’t understand why RAID should be configured in ESXi, when it’s configured in HW RAID? Seams like the only choice if one wants the fan speed at 6%. What about uprgrading CPU to xeon? > Daniel, thanks for your input, though I still think I’m gonna go with the P222 due to the fanspeed issue. You can run Hyper-V for free as well now. Google this to view instructions “HP ProLiant Gen8 Server series – How to Reinstall or Upgrade Intelligent Provisioning on HP Gen8 Server”. http://2cpu.co.kr/bbs/board.php?bo_table=unbox&wr_id=1349. Also much greater success rate of rebuilding raid 10 than raid 5 as raid 5 has to do a full parity check on all discs. My previous NL36 has an Intel RS2WC040 raid5 card in it. P/N: 627812-B21 Comp. EN 60950-1, Hallo, verkauft wird: HP ProLiant MicroServer Gen8 G1610T mit 4+8gb ECC RAM, ideal für... Versand möglich. or are there any instructions/drawings of it? As a Gen8 owner, do you see any drawbacks of the server? anyone got it working with this processor? some days ago I also installed my Intel Xeon E3 1230v2 in my G8, but iLO is always showing a temperature of 40 degree celsius – sometimes up to 46. Benjamin Bryan | Self-Hosted from North Idaho. Only I don’t have the 3.0 support. And I guess that a seperate controller card is necessary to add these two disks, if a disk is installed in the ODD and the four diskspaces are used in the main part? Yesterday I got my hands on a cheap Xeon E3-1230 v2 and installed that, and the server won’t boot past the “Checking Intel QPI/Memory” post screen with the Boot Code 0114. Thanks to a homeservershow forum member keeping track of prices I ordered the HP Gen8 Microserver 1610T … of course, nobody wants to run VMWare on a Celeron so obviously the first thing to try is installing a Xeon processor.. Update April 12, 2020.The 8th Gen HP Microserver … HP Microserver Gen8 - 16GB ECC RAM - XEON 1240V3 CPU: Condition: Used. Product working as designed. Hi, the onboard 120i controller is not full hardware raid and needs a non-opensource driver if you’re running in RAID mode. My cpu temp in ilo is also stuck at 40% which is why the Akasa K25 i mounted is drawing full 12v from molex. Windows7 serves as media streaming, BitTorrent and VPN server. Hi can I combine 4gb and 8gb memory modules, server has 4gb RAM and I want to buy another 8 gb modul kingston KTH-PL316E/8G it will work in dual channel then? It is very close in performance to an i3, and it does support virtualization. But now the bios screen says its not the required size hdd in bay 5 (odd)? The only thing I can see is that at every power up (can’t recall if wall power was removed or if this was just an OS reboot, I was moving the server around so it might have been the former) I see: On-board clock set; was 01/01/1970 00:09:17. The twin 500GB disks have run 24×7 for 4 years now, so time to upgrade to SSD maybe. Thought it was std. Just use my first name before @dintid.dk to find me. The fan speed does not appear to be locked but it might be that adjusting the cooling options in the BIOS would be necessary if you have e.g. Means it will be almost impossible to use 32gb as UDIMM is the “discount” ECC version and really aren’t available in 2x16gb kits. I am looking for one for my config without much luck!! I bought two of these: http://www.superbiiz.com/detail.php?name=W8GE1600KI I only run ECC memory, maybe there is some non-ECC that would work for people that care less about data integrity. I have both tried in the USB 3.0 and 2.0 (both front and back). I have 4 x 2TB WD Reds. It obviously depends on what you’re trying to do, but I would put the controller into SATA mode and run ZFS over using the 120i in just about any scenario… the only thing I have seen close to ZFS’s end-to-end data integrity is buying a storage appliance like NimbleStorage… but ZFS is free and open source and will run on your Microserver. The heatsink uses slim ILM instead of normal 1156/1155 format, so consumer aftermarket stuff like Corsair or Coolermaster are not available. Hp Gen8 Microserver - Bewundern Sie dem Gewinner der Tester. I would like to build 6 2,5 disk inside, and 2 disk in raid 1 for the os, and the 4 3,5 disk so that Will be 12 disks. Harpinder, what is the difference between the P222 and the P410i? Given how old this post is I’m not expecting a reply, but wondering if you had to do any tricks in the BIOS (not that I can see any options) to get it to work? Just have to wait for the bios update HP has published news about, but not made available, grr. – I ran 8 concurrent instances of burnp6 under Linux while watching the CPU temperature using the lm-sensors. haha, Hi guys i have plan to buy Microserver and want to fill with more than 3 TB SATA drives, doe’s the server handle bigger disk or it’s limited to 3 TB only as HP stated, Officially 3TB, but unofficially some people have gotten 4TB to work: http://sammit.net/hp-proliant-microserver-gen8-supports-4tb-drives/, Thanks Ben i have another question, have you tried to burn installed Xeon E3-1230 V2 with burning utility like Prime95 or InteLburntest 2.54, if yes what temperature did you get. Always installed using Intelligent Provisioning. Re RAID cards: The LSI 9240-8i is about the same price new on eBay as the m1015, but it also supports RAID5. At least not for home consumers. Super Capacitors wear off eventually but HP does not state how to diagnose them but opening the server and checking leds on the memory module.

Ein Islamischer Orden 7 Buchstaben, Apache Konzert Mannheim Abgesagt, Forscher Quiz Für Kinder, Fondsgebundene Rentenversicherung Nach 12 Jahren Kündigen, Deutsch Spanisch Duden, Ostwind 4 Kritik, Berlin Kinder Wochenende, Toskana Mit Baby,